Everyday bathing is the indicator you are health conscious, wanting to rinse off your body from the dirt, dust, sweat, germs, and dizziness to feel all fresh. And multiple showering systems are giving you the pleasure of bathing with the right flow of water which you want to feel.
Out of too many shower systems, the most luxurious and comfortable bathing experience that many like is the handheld shower but how to install a shower with handheld which you can get it set up all by yourself, converting you the expenses to hire the professional plumber.
Not being attached against the wall, the handheld shower can get into your hand, giving you the convenience of plunging it out in your hand and adjusting the power of water according to our mood.
Labeled to be one popular shower system, the adjustability that it provides you while in the shower with adjusting the speed of the water, and the ability to extend the hosepipe to let the shower head reach as close to you.
Guaranteed to provide you with a relaxing and comfortable showering experience, the handheld shower system tops the demand of the bathers With the added flexibility, the installation phase goes as convenient to get it all readied in no time.
So, how to do it, let’s get all known in a few.
Contents
How to install a shower with a handheld
And it is simple if you dearly follow the following installation process to go through the phase of how to install a shower with handheld all by yourself.
Let’s assume you got all of the pipes behind the walls all set up and installed already, and all you are left with hooking up the brand new handheld shower.
So, what you do need first are the following to get started with the installation phase;
- Brand new handheld shower kit
- Wrench
- Screwdriver
- Teflon tape
The core installation process of handheld shower
Turn off the water
The first and foremost task is to close the water supply, NOT to let the pipe spill even a drop of water, which can ruin the entire installation process and could get the necessary tools and equipment turned wet.
More you try to do the installation with the running water, that is not going to happen for sure. So, lookup for the main water supply line coming from the water tank and right into your bathroom to find the valve to close the supply.
You can find the same mostly from the garage or the backside where all the pipes come down right from the water tank assigning the duties to serve the water to reach multiple portions of your home.
Installation of the mounting bracket
Like every other part, the brackets are necessarily required for the object to hook up correctly. And this one is used as the mounting bracket for the handheld shower, it allows to keep the showerhead intact and placed upright when not in use.
Require just the gentle tightening done by your hand, this mounting bracket goes with the screw to firmly place up on the wall, but there should be a certain point to note; the hose connection should stay to the bottom from the bracket for the added convenience to use the shower throwing the powerful flow of water out.
Hose connection
The hose connection to install correctly with the mounting bracket, and that is done to find the right end to get closed in by the bracket. Even there comes the extra cone that looks to be decorative one but in generality, and it closes the end where it screws the wand with the mounting bracket giving it protection from accidentally losing and hitting anything by a fault with reducing the chance of getting wet and turning rusty over the time.
Connection of the wand
And the last stage goes with screwing the wand onto the hose and tightened by the hand where you certainly do not require the wrench or the plier, and it can get loosen up by the hand in the future.
Test out of leaks
After getting the whole process of installation the handheld shower done, there comes the phase of testing out the leaks if it is happening anyhow by turning on the valve which you had previously turned off to spill the water supply out of the hose as well as anything that got tightened by hands causing the leaks.
If not, then it means everything is well and good, and it is good to go!
But if there is the water leaking out, that is the real problem to fixate the possible issue causing the leaks to see if they require just the extra tightening of the objects or if there are some components broken and causing the leaks.
What’s the standard height of showerheads?
Well, it goes between the standard 72” to 78” from the bottom surface of the floor for increased efficiency. So, you must take note of that quite an essential factor.
Conclusion of how to install a shower with handheld
Too goodly enjoying the handheld shower, these easy-to-follow installation instructions are quite adaptive to implement without you needing to call in the plumber.
Still, the handheld shower is pretty simple to install and requires a not-too-technical approach to get done with it, making you sparing you good bucks.
So, why wait for it as the summer is fast approaching and it is the best time to renovate your bathroom with having the handheld shower installed to truly enjoy taking a bath the way you want by upping and downing the stream of water from strong to mild.
Leave a Reply